A selection of glues and adhesives for sewing and crafting

Please note:  Shipping within Canada only.  These items cannot ship to the USA or internationally.

Odif Temporary Spray Adhesive 

Characteristics: A low odor temporary repositionable spray adhesive that does not stain or cause stickiness.

Odif 505 Benefits:

1. No waiting. Can be used immediately.
2. Can be used with most types of material and paper
3. Dries clear.
4. Low odor.
5. Does not transfer.
6. Does not wet material.
7. Does not cause yellowing.
8. Can be repositioned.
9. Adheres to most materials.
10. Enables project to be completed more quickly as it eliminates tacking (no pins).

Odif 505 Spray Uses:

1. Raw edge appliqué when you are going to sew it in place.
2. Penny Rugs ‚ spray the back side of wool shapes, place on background to Fix in place then use a blanket stitch around the edges for a permanent hold.
3. Baste your quilts ‚ Spray the batting or the wrong side of the backing and top to layer your quilt.
4. When loading a quilt on a long arm machine, use 505 to hold the lead edge of the batting and top to the backing fabric. This way you only pin once along the lead edge.
5. Spray 505 on Embroidery stabilizer. Hoop your stabilizer, spray, and then stick the garment in place on top without hooping.
6. Use 505 to hold patches in place before stitching down.
7. Make fabric covered buttons by spraying the fabric then cover button form. Trim fabric and fold inside top. Apply button back. Fabric will not shift.

Odif 505 Advantages:

1. 505 contains neither acid nor water and so does not wet material.
2. Problems often experienced with other glues.
3. Because 505 is an easy to use spray adhesive, it is very economic and convenient.
4. The low odor means that unlike many other adhesives, even when used in confined spaces 505 can be used with little or no discomfort.
5. 505 can if necessary be easily be removed by washing. Many other adhesives leave a sticky residue that is often difficult to remove.
6. 505 dries clear. Some other adhesives leave stains or marks on exposed surfaces.
7. Unlike many other adhesives, 505 is always effective providing just the correct amount of stickiness. Many other products give either insufficient or too much hold.
8. 505 is proven in both domestic and industrial environments to provide the correct level of adherence thus avoiding the time wasting associated with pinning, tacking.

Amazing Goop - Craft - coming soon!

Amazing GOOP Craft has all the exceptional qualities of All Purpose Amazing GOOP but has a specially designed nozzle tip for small craft applications. Ideal for all types of materials including, wood, stone, metal and glass.

• Strongest single component craft adhesive available 
• Nozzle tip is ideal for small craft projects 
• Temperature resistant – remains flexible, even in extreme temperatures 
• Dries clear 
• Washer/dryer safe 
• Waterproof – bond remains secure even when exposed to water

INSTRUCTIONS

Follow these step-by-step directions when using Amazing GOOP Craft: 

Read directions and test small area before use.

1. Surface should be clean, dry, and free from dirt. For best results, roughen surface before use.
2. Puncture seal in neck of tube using pointer cap. Product can be used between 50 and 90 °F / 10 and 32 °C.
3. Apply directly to each surface to be bonded or repaired. Allow to partially cure approximately 2 minutes before mating surfaces. Hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive-coated surfaces are placed in contact with each other and sufficient pressure is exerted to establish full contact.
4. Allow repair to cure for 24 hours. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.
5. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
6. Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.

FAQS

How long does Amazing GOOP take to dry?
A full cure takes 24 to 72 hours, depending on the surrounding environment. With lower temperatures and higher humidity, cure time increases; with higher temperatures, cure time decreases. To speed drying time, apply heat using a handheld dryer set on low. Hold dryer at least 6 inches from the surface.

How can Amazing GOOP be cleaned up?
Small amounts of acetone or citrus-based solvents may be used on uncured adhesive; the adhesive will ball up and brush off. Cured adhesive may be removed by cutting or scraping.

Is Amazing GOOP water resistant?
Yes. Amazing GOOP is water resistant immediately upon application. Apply Amazing GOOP directly to the surface to be sealed. Use thin coats of Amazing GOOP to build a thick coating on the surface to be sealed, allowing each layer to set 3 to 4 hours. This is especially ideal for smooth surfaces, such as plastic, glass or ceramic. Amazing GOOP hardens by solvent evaporation, so allow time for thorough hardening to ensure proper bonding and wear resistance.

What temperature range does Amazing GOOP withstand?
Amazing GOOP is best when applied in temperatures ranging from 50 °F to 90 °F (10 °C to 32 °C). (Note: Amazing GOOP can be applied outside this temperature range, but cure time may increase significantly.) Once cured, Amazing GOOP can withstand temperatures between -40 °F and 180 °F (-40 °C to 82 °C).

E6000 Clear Extreme Tack - coming soon!

Extreme Tack is a unique adhesive that allows you to make your own glue dots! It dries tacky for repositioning – ideal for mounting paper and lightweight materials to scrapbooks, walls, home décor items and more.

• Stays permanently tacky!
• Excellent on all types of fabric and just about any substrate
• Make adhesive dots or lines of any size
  
• Use over and over!
• Dries clear
• Acid-Free
• Washable

INSTRUCTIONS

Follow these step-by-step directions when using Extreme Tack:

1. Remove inner seal on bottle.
2. Apply glue to surface.
3. Allow glue to dry for at lease 8 hours.
4. Tack onto second surface.
5. Remove and/or reattach as needed.
6. Washable after 72 hours.

FAQS

How long does Extreme Tack take to dry?
Allow Extreme Tack to dry 8 hours before mounting objects.  Wait 72 hours before washing.

Can I remove and reapply objects adhered with Extreme Tack?
Yes, Extreme Tack remains tacky, even after numerous applications!

Will Extreme Tack dry clear?
Yes, Extreme Tack looks opaque when wet but will dry completely clear.

Is Extreme Tack safe to use on photographs?
Yes. Extreme Tack is acid-free and photo-safe.

E6000 Clear Fabri-Fuse - coming soon!

E6000 FABRI-FUSE creates an exceptional bond for general fabric applications. Its extreme flexibility, stretch and recovery won’t create bumps or bulges on fabric and will allow fabric to remain flexible—even after washing. It bonds permanently, dries clear and is acid-free with almost no odor. E6000 Fabri-Fuse is so easy to use, it makes all your craft and hobby projects fun and unique. Machine washable and can be sewn through once dry!

• Great for projects using fabric, felt, metal, wood, glass, rubber and much more
• Dries clear
• Acid-Free
• Washable
• Low Odor

INSTRUCTIONS

Follow these step-by-step directions when using Fabri-Fuse:

1. Remove inner seal on bottle.
2. Apply directly to each surface to be bonded.
3. Mate surfaces.
4. Dry flat for at least 8 hours.
5. Washable after 72 hours.

FAQS

How long does Fabri-Fuse take to dry?
Dry flat for 8 hours.  Fabrics are washer safe after 72 hours.

Can Fabri-Fuse be dry cleaned?
Yes, dry cleaning will not affect the strength of the glue.

Will Fabri-Fuse dry clear?
Yes, the glue looks cloudy when wet but will dry completely clear.

Is Fabri-Fuse safe to use on photographs?
Yes. Fabri-Fuse is acid-free and photo-safe.

E6000 Clear Spray Adhesive - coming soon!

6000 Spray Adhesive is a permanent, multi-purpose latex-based adhesive without the toxic smells, fumes or unhealthy side effects. It is strong, flexible, water-resistant, resists bleed-through and yellowing. Ideal for a many substrates such as paper, wood, cardboard, photos, medium to heavy weight fabrics, glass, metals and more.The easy-to-use pump sprays a fine, even mist that is solvent and propellant free.

• Low odor 
• Easy water clean-up
• Non-flammable 
• Water resistant
• Latex formula contains no VOCs, harsh chemicals or propellants 
• Photo safe 
• Dries translucent 
• Indoor/Outdoor

INSTRUCTIONS

Follow these step-by-step directions when using E6000 Spray Adhesive:

1. Read all directions before using.
2. Shake vigorously before use.
3. Protect surrounding area from overspray.
4. Point spray tip away from face.
5. Hold bottle 8-10 inches away from surface.
6. PAPER, PHOTOS, CARDBOARD & FOIL: Spray a thin, light coat to one surface. Join materials and continue to apply pressure periodically making sure to secure corners. Allow to dry 1-3 minutes.
7. POROUS MATERIALS (including foams and Styrofoam: Spray a heavy coat to both surfaces to be joined. Mate surfaces together. Allow to dry.*
8. NON-POROUS MATERIALS: Spray a light coat to one surface. Mate surfaces together. Allow to dry.*
9. IMPORTANT – CLEAN AFTER EACH USE: To prevent clogging, remove and rinse nozzle/straw. Pump warm tap water through sprayer until all adhesive is cleared out. Then dry, replace in the bottle, secure cap. *Maximum strength may not be reached for 1-5 hours. Styrofoam may require an overnight cure.

FAQS

What substrates does E6000 Spray Adhesive work on?
E6000 Spray can be used on a wide variety of substrates. Use on paper, wood, poster boards, cardboard, photos, foil, medium- to heavy-weight fabrics, vinyl, foam, Styrofoam, glass, felt, plastic, rubber, leather & metals.

What temperature range does E6000 Spray Adhesive withstand?
Application temperature: Best applied between 50 – 130 °F (10 – 54 °C). Service temperature / heat resistance: 30 – 150 °F (10 – 65 °C).

Is E6000 Spray Adhesive UV resistant?
Resists yellowing.

Can E6000 Spray Adhesive be used on Styrofoam™?
Yes. E6000 Spray can also be used on other foams.

Is E6000 Spray Adhesive water resistant?
Yes. Cured adhesive has good water resistance.

How long does E6000 Spray Adhesive take to dry?
Paper, photos, cardboard and foil: (read directions) Allow to dry 1 to 3 minutes. Porous materials: (read directions) Allow to dry 1-5 hours. Styrofoam may require an overnight cure. Non-Porous Materials: (read directions) Allow to dry 1-5 hours.

What is used to clean up uncured E6000® Spray Adhesive?
Regular warm water rinsing.

E6000 Premium Clear - coming soon!

BONDS PLASTICS OTHER ADHESIVES WISH THEY COULD! E6000 PREMIUM forms permanent bonds to the most difficult items such as plastics used in 3D printing, polycarbonate, PVC, ABS, acrylics, polystyrene, fiberglass, etc., while also providing super strength bonds to other materials such as wood, metal, fabric, ceramic, glass, cement, clay, and more! Its unique formula is the perfect adhesive for hobby/crafts, home improvement/DIY projects, auto repairs, industrial applications and so much more! ACCEPT. NO. SUBSTITUTES.

• Extreme flexibility
• Withstands extreme temperatures
• Waterproof
• Dries clear/Paintable
• Washer/Dryer safe
• Permanent

INSTRUCTIONS

Follow these step-by-step directions when using E6000 PREMIUM:

Read directions and test small area before use.

1. Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.
2. Puncture seal in neck of tube using pointer cap. Ideal application temperature range is 50 to 90 °F (10 to 32 °C). Fully cured adhesive withstands temperatures from -40 to 180 °F (-40 to 82 °C) intermittently.
3. Apply directly to each surface to be bonded. Allow to partially cure, approximately 2 minutes, before mating surfaces.
4.  Allow 24 hours for curing. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.
5. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.

NOTE: May damage finished surfaces. Avoid such contact until completely cured. Not recommended for use on Styrofoam™ or paper products. Not recommended for any items that come into contact with food, drinking water or animals. Do not dry clean.

FAQ

How long does E6000 Premium take to dry?
E6000 Premium sets in approximately 20 minutes, allow 24 hours for curing. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.

What makes E6000 Premium different than other adhesives?
E6000 Premium is formulated with enhanced adhesion promoters to provide outstanding performance as expected – but this powerhouse adheres to plastics that other adhesives only dream of being able to bond without fail!

Is E6000 Premium washer and dryer safe?
Yes.

What is the best way to clean-up E6000 Premium?
Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping.